Application
DGT Multirouter 3G EVDO/HSPA solution is dedicated for mobile networks operators interested to offer a broadband Internet access and voice services in CDMA2000 and UMTS networks
Unique Features
Multirouter 3G switches between CDMA2000 and UMTS automatically choosing a network with a better transmission parameters. The network switching can also be performed manually by the
Multirouter’s user.
The Multirouter 3G can work as traditional router with 4 port switch, wireless access point, and telephone gateway or as a traditional EVDO/HSPA modem when the USB cable is plugged into the USB client socket. When the USB connection to a PC is detected the router switches automatically from the router mode to the modem connection type mode . The connection type mode can be monitored in Multirouter’s Connection Manager Application.
Voice Services
Multirouter 3G supports voice services in two, CDMA2000/UMTS and VoIP gateway mode.
In CDMA2000/UMTS gateway mode the Multirouter 3G works as an ordinary Fixed Wireless Terminal.
In VoIP gateway mode the Multirouter 3G utilize its integrated IP PBX functionality to make internal calls between POTS terminals and IP terminals and supports trunk connections to external VoIP providers.
Additional cost routing optimization between CDMA2000/UMTS and VoIP is supported.
High Speed Internet Access
HSPA 7.2 / 5.76 Mbps Data Transmission • EVDO 3.1 / 1.8 Mbps Data Transmission • WAN Ethernet Port • 4 port Ethernet Switch • WLAN 802.11 b/g/n.
Additional Tools
Remote Terminal Management System - Routers can be managed from the centralized management system providing tools for Remote Configurations, Firmware Updates and Ongoing technical terminal support by an operator.
Customization and Branding
Moultirouter 3G Customization and Branding is available.
Branding on the device includes custom casing, packaging , software changes to accomodate operator’s marketing objectives.
Technology
WAN
CDMA2000 1xEV-DO Rev. A 450 MHz , 800 MHz (option)
GSM/GPRS/EDGE – 850/900/1800/1900 MHz
R-UIM card support
Ethernet port - 10/100 BaseT
Data transmission speed
EVDO rev.A - up to 3.1Mbps (downlink), up to 1.8Mbps (uplink)
HSUPA - up to 5.76 Mbps, HSDPA up to 7.2 Mbps
LAN, WLAN
Ethernet Switch – 4 x 10/100 BaseT
WLAN access point – 802.11 b/g/n (modes - router, bridge, AP client, WDS, multiple BSSID)
USB
1 port USB Host 2.0
1 port USB client
Antenna
450 MHz external antenna
CDMA diversity 450 MHz internal antenna
900/1800/2100 MHz external antenna
2x WiFi 2.4 GHz external antenna
Telephony features
Interface parameters
Type and connector: 1 x FXS, 2-wire, RJ11 (used in case of CDMA2000/UMTS voice service and VoIP)
Loop voltage: 48V DC
Loop current: 23 mA
Ringing voltage: 60 V RMS +/- 15 V, 25 Hz
Line impedance: 600 Ω
Subscriber’s loop max resistance: 1200 Ω
DTMF and pulse dialling modes
CLIP FSK calling line presentation
Configuration of line and tone parameters according to country requirements
CDMA/UMTS voice service support
• AMR, FR, HFR voice codecs (GSM/UMTS)
• CLIP-FSK, Call waiting, Call Transfer, Call Forward, SMS, Baby Call (Hot Line)
VoIP, IP PBX service support (option)
SIP 2.0
Voice codecs: G.711 A/μ, G.729AB
Fax - G.711 pass through and T.38 fax relay
DTMF inband and relay (RFC 2833/4733)
VAD (Voice Activity Detection), CNG (Comfort Noise Generation)
Echo cancellation - G.165/G.168
Packet Loss Compensation, Silence Suppression
IP PBX (optional) – SIP Proxy/Registrar functionality
Selected services supported: 3-way call, Call Hold, Call Transfer, Call Forward, DND, Call Waiting
Dial Plan support
Router / gateway features
Protocols
NAT, DHCP server/client
DNS relay, DDNS
QoS - TOS/DiffServ, 802.1p
PPP, PPoE
NTP (time)
RIPv1, RIPv2
VPN
Internet access - PPPoE, PPTP, L2TP
Pass-through - PPTP, L2TP, IPSec
Security
MAC, IP address and port filtering
Demilitarized Zone (DMZ)
Statefull Packet Inspection firewall
WLAN – WEP 64/128, WPA, WPA2, WPS, hidden SSID
Other
Port forwarding
Application Layer Gateway
Event logging
Management and applications
LED Indicators
CDMA connection
WAN, 4 x LAN ports
Telephone port
Main or battery power supply
Management
Local - available through serial interface RS-232
Local – Connection Manager for the modem mode
Remote - available to subscribers through www interface
Remote – available to operators dedicated remote central management system (optional for operators)
Remote - SNMP (optional)
Applications
Router setup wizard software
SMS client
Environmental and general properties
Dimensions and weight
190x175x37 mm, 380g
Power
Power Adapter Supply 120/230VAC/ 5VDC
Backup Power Supply (battery) Li-ion: 3,2 V, 2000 mAh
Power Consumption - max. 15W
Operating temperature and humidity
0 – 40 OC
5 to 90% (noncondensing)
Approvals/Certification
CE
EMC
Wi-Fi (802.11 b/g)
Package Contents
Multirouterr 3G
Power Adapter 5V/1500mA
Li-ion Battery
1 x Telephone cable
1 x LAN cable
User Quick Start Guide
Order codes - device versions
Multirouter 3G EVDO/HSPA with VoIP/IP PBX support
Multirouter 3G EVDO rev. A 450/800 (option) MHz and UMTS/ HSPA
- CDMA2000 1x EVDO rev. A 450 MHz and UMTS/HSPA band operation
- R-UIM Card support
- G3 Fax Transmission
- 4-Port Ethernet Switch
- WLAN 802.11 b/g/n
- VPN Security